These Premium kits are assembled by us in the UK with our CG by Jupiter Paper-in-Oil capacitors to give a warmer woody tone, CTS “CGS” SupraPots in the volume position to retain tone and note definition as you roll down the volume to give a more natural control and CTS "CG" for the tone controls.   We then sort through our potentiometers to create matched sets to give you an even response when rolling down your volume and tone controls.

This is a 4-Way Tele prewired assembly for Telecaster style guitars featuring 2 single coil pickups. It will drop into most Mexican or American Fender Teles with no modification. Wired with 22 AWG vintage push-back wire for that vintage look and sound.  If you are installing this on an import guitar with metric sized pots you will need to replace your control plate to accept the slightly larger US-Spec pots and buy US-Spec knobs.

With the 4 Way switch you get the traditional 3 Tele switch sounds plus the 2 single coil pickups in series for a thicker full on sound. 

The 4 Way Switches are machined so that they will opperate correctly in a standard Tele control plate as the slot is not long enough to allow a standard switch to fully engage position 1 & 4.

Please see the options below to customise your kit.

In the Kit:

• [1]  250K CTS “CGS” SupraPots, Split shaft with solid conversion sleeve with 9.5mm (3/8") Shaft Diameter and 6.0mm Threaded Length.
• [1] 250K CTS "CG" Split Shaft Matched Set Potentiometers with 9.5mm (3/8") Shaft Diameter and 6.0mm Threaded Length.
• [1] 0.047uf CG by Jupiter Paper-in-Oil capacitor
• [1] Oak Grigsby 4-Way Switch machined to opperate correctly
• [1] Switchcraft 1/4" Mono Input Jack 
• *(0.022uf are used with 500K-Ohm Pots Option)* 
• Wiring Diagram

What is Solderless

Potentiometer/Kit Selection Table